Maker Sasa Karanovic has constructed a massive cooling array consisting of 100 Noctua PC fans to demonstrate the capabilities of his new OpenFAN XL controller. The Toronto-based electronics and 3D printing hobbyist designed the setup to validate the open-source hardware’s ability to manage high-density cooling environments without failing under load.
OpenFAN XL Controller Architecture
The OpenFAN XL controller features ten distinct headers, allowing it to manage multiple fan banks simultaneously. Karanovic organized the 100 fans into a 10 by 10 grid to utilize every header on the device. This configuration allows the controller to manage groups of ten fans at once, providing a baseline level of granularity for the entire array.
While the fans are not individually addressable, the system supports flexible wiring through splitters. Karanovic demonstrated that the first two headers could control 50 fans each when wired in parallel. This flexibility suggests that the controller could theoretically support up to 500 fans if the software allowed, though hardware limitations currently cap the maximum capacity at approximately 200 units.
The controller also includes support for four integrated temperature probes. These sensors allow users to monitor thermal conditions within the cooling array, ensuring that the system does not overheat during operation. Karanovic noted that the controller handled the 100-fan load with ease, indicating that the hardware is well within its operational limits for this specific test.
Open Source Hardware Availability
Karanovic developed the OpenFAN XL controller as an open-source project, making the design accessible to other enthusiasts and professionals. The controller is pitched as a useful tool for server builders and those managing high-power devices that require robust cooling solutions. The project highlights the growing trend of open-source hardware in the PC building community, where users can modify and improve upon existing designs.
Interested buyers can purchase the OpenFAN XL controller directly from Karanovic Research. The device is currently available for pre-order at a discounted price of $2,355, down from its standard retail price of $2,926. The high price point reflects the complexity of the hardware and the specialized nature of the cooling solution.
Karanovic admitted that the 100-fan wall might seem excessive for typical consumer use, but it serves as a rigorous stress test for the controller. He suggested that the setup could be used for extreme cooling challenges, such as funneling a massive gust of air at a GPU or laptop to test thermal performance. The project underscores the potential for open-source hardware to push the boundaries of what is possible in PC cooling.
Source: Tom’s Hardware


